The Swaging SPIN Tool is designed for the most common tubing diameters in HVAC. The high-temperature method preserves the copper’s/aluminum’s malleability while performing the swage, preventing cracks and leaks. The Swaging Spin Tool is for hard and soft copper tubing. It creates a precises deep swage without wobbling or cracking that is easier to braze.
To top that, you can make swages with the SPIN Swaging Tools in just 5 seconds!
To perform the swage in copper/aluminum tubing, simply attach the corresponding SPIN Tool size to a drill*. Because they perform their job using high-temperature and friction, no clamping tools or holders are necessary. Swages made with the SPIN Tools are compatible with high-pressure refrigerants such as R410a.
All SPIN Tools are designed to work with drills and/or screwdrivers, with a minimum of 1,800 RPM and 500 watts, for corded drills, or superior and 1,800RPM and 18V, or superior, for cordless drills. Using the SPIN Tools with a less powerful equipment tool than suggested, may result decreased and low-quality performances.
FEATURES:
- Flawless swages in five seconds
- Universal drill compatibility
- Reusable tool with long-life design
- Innovative new technology
- Heat by friction
- Works with soft copper creating fewer cracks
- To use with hard cooper just preheat the cooper.
OPTIONS:
INCHES
1/4″ – S1014N
5/16″ – S1516N
3/8″ – S1038N
1/2″ – S1012N
5/8″ – S1058N
3/4″ – S1034N
7/8″ – S1078N
MM
6mm – S1806M
8mm – S1808M
10mm – S1810M
12mm – S1812M
14mm – S1814M
15mm – S1815M
16mm – S1816M
18mm – S1818M
19mm – S1819M
22mm – S1822M
